Bisphenol-A Epoxy Vinyl Ester Resin Derakane Momentum 411-350

DERAKANE 411-350 epoxy vinyl ester resin is based on bisphenol-A epoxy resin and has become the "industry standard" due to its wide range of end-use applications and ability to be used in a wide range of fabrication techniques.

The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food, subject to user's compliance with the prescribed limitations of that regulation.

Equipment fabricated with DERAKANE 411-350 resin has superior elongation and toughness and better impact resistance and less cracking due to cyclic temperature, pressure fluctuations and mechanical shocks providing a safety factor against damage during process upsets or during shipping installation.

Composites fabricated with DERAKANE 411-350 resin provide resistance to a wide range of acids, alkalis, bleaches and solvents. This resin holds up well in corrosive environments, postponing the need for replacements. Equipment fabricated with DERAKANE 411-350 resin tolerates heavy design loads without causing failure due to resin damage. This facilitates working with large weight-bearing equipment with confidence.

• Corrosion Resistance: Resistant to a wide range of acids, alkalis, bleaches, and solvents, making it suitable for harsh chemical environments
• High Elongation and Toughness: Provides superior impact resistance and resistance to cracking due to temperature and pressure fluctuations
• Ease of Fabrication: Designed for various fabrication methods, including hand lay-up, spray-up, filament winding, and others
• Light Color: Its light color allows for easier defect detection during manufacturing
• Good Interlaminar Adhesion: When properly fabricated, laminates exhibit good interlaminar adhesion, ensuring a strong, durable structure
• Tolerates Heavy Loads: Resists failure due to resin damage, even under heavy design loads, making it suitable for large weight-bearing applications

• FRP storage tanks
• Vessels
• Ducts
• On-site maintenance projects
• Chemical processing
• Pulp and paper operations

Drums - It is highly recommended that all material is stored at stable temperatures below 25°C (77 °F). Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture pick-up and monomer loss. Rotate stock.